Steering Angle Adjustment
Steering Angle Adjustment1. Loosen the locknut of the tie-rod end.
2. Remove the rack boot clamp.
3. Rotate the tie rod and adjust the steering angle.
Standard steering angle [Standard suspension]
Inner: 38° 41'± 3°
Outer: 33° 15'± 3°
Standard steering angle [Sport suspension]
Inner: 38° 36'± 3°
Outer: 33° 07'± 3°
Note:
^ Rotate and adjust the tie rod. The difference between right and left dimension L shown in the figure should be within the specification.
Standard 3 mm (0.12 in) or less
4. Tighten the locknut of the tie-rod end.
Tightening torque 68.6-98.0 N-m (7.00-9.99 kgf.m, 50.6-72.2 ft-lbf)
5. Correct the rack boot deformation.
6. Install and fix the rack boot clamp.
7. After adjusting the steering angle, always inspect and adjust the toe angle.