Stabilizer Bar: Service and Repair

STABILIZER BAR REMOVAL/INSTALLATION
1. Remove the stabilizer bar bushings.
2. Remove the wheel and tire.

Note
^ Use the hex holding feature to prevent the ball stud from turning while removing or installing the stabilizer link nut.

3. Remove the 2 lower stabilizer bar link nuts. To install, tighten to 55 N-m (5.5 kgf-m, 41 ft-lbf).
4. Remove the stabilizer bar.

Note
^ Access the stabilizer bar through the LH wheel opening.

5. To install, reverse the removal procedure.