Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> Tribute 4WD L4-2.3L Hybrid >> Repair and Diagnosis >> Cruise Control >> Testing and Inspection >> Pinpoint Tests >> Pinpoint Test 7: Flash Code 2 - Stop lamp Switch Circuit Failure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Pinpoint Test 7: Flash Code 2 - Stop lamp Switch Circuit Failure



-
PINPOINT TEST 7: FLASH CODE 2 - STOPLAMP SWITCH CIRCUIT FAILURE

Normal Operation

When the speed control actuator carries out the self-test, a voltage signal is sent through circuit (V/W). Circuit (V/W) carries the signal to the high mounted stoplamp, which then is routed to ground. If the signal fails to be grounded, flash code 2 is set by the speed control actuator.

Possible Causes
- Wiring, terminals or connectors
- High mounted stoplamp
- Stoplamp switch
- Speed control actuator

Diagnostic Procedure

CAUTION: Use the correct probe adapter(s) when making measurements. Failure to use the correct probe adapter(s) may damage the connector.

Step 1-Step 2:






pro multis · About Operation CHARM