Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> Tribute 4WD L4-2.3L Hybrid >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil: Service and Repair



-
IGNITION COIL-ON-PLUG - 2.3L REMOVAL/INSTALLATION

Removal

1. Detach the 2 wire harness retainers from the ignition coil stud bolts.

2. Disconnect the 4 ignition coil electrical connectors.

3. Remove the 4 stud bolts and the ignition coils.


NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.

Installation

1. Install the ignition coils and bolts.

- To install, tighten to 8 Nm {0.8 kgf-m, 71 in-lbf}.


NOTE: Apply a small amount of dielectric grease to the inside of the ignition coil boots before attaching to the spark plugs.

2. Connect the ignition electrical connectors.

3. Attach the 2 wire harness retainers to the ignition coil stud bolts.

pro multis · About Operation CHARM