Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2009 >> CX-7 AWD L4-2.3L Turbo >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Stabilizer Bar >> Service and Repair >> Front Stabilizer Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Stabilizer Removal/Installation




FRONT STABILIZER REMOVAL/INSTALLATION

1. Remove the side cover and under cover.

2. Drain the power steering fluid. Initial Inspection and Diagnostic Overview

3. Remove the transverse member. Transverse Member Removal/Installation

4. Remove the front crossmember component. Front Crossmember Removal/Installation

5. Remove in the order indicated in the table.

6. Install in the reverse order of removal.










Front Stabilizer Installation Note

1. Install the stabilizer bar so that the identification mark is on the left side of the vehicle.






Stabilizer Bushing Installation Note

1. Align the outer side of the positioning plate with the stabilizer bushing.






Stabilizer Bracket Installation Note

1. Install the stabilizer bracket so that the arrow is pointed to the front.






pro multis · About Operation CHARM