Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2009 >> Tribute 2WD L4-2.5L Hybrid >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Engine Block Heater >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Block Heater: Service and Repair



-
BLOCK HEATER REMOVAL/INSTALLATION - 2.5L










1. With the vehicle in NEUTRAL, position it on a hoist. See Lifting.

2. Drain the cooling system. See - Removal and Replacement.

3. Disconnect the block heater electrical connector.

CAUTION:Make sure that the block heater wiring is routed and secured away from rotating or hot components or damage to the wiring may occur.
4. Remove the block heater.

- To install, tighten to 21 Nm {2.1 kgf-m, 15 ft-lbf}.

5. To install, reverse the removal procedure.

6. Fill and bleed the cooling system. For additional information, see - Removal and Replacement.

pro multis · About Operation CHARM