Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2010 >> 3 L4-2.5L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> Overhaul >> Overhaul Procedures G66M-R >> Primary Shaft Components Assembly >> 4TH Synchronizer Ring, 4TH Gear, and Bearing (4TH Gear End) Assembly Note
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

4TH Synchronizer Ring, 4TH Gear, and Bearing (4TH Gear End) Assembly Note

4th Synchronizer Ring, 4th Gear, and Bearing (4th Gear End) Assembly Note





1. Install the 4th synchronizer ring, double cone, inner cone, 4th gear, and a new bearing using the SST.





2. Measure the clearance between the 3rd gear and 2nd gear.
^ If it exceeds the maximum specification, reassemble the primary shaft component.

3rd gear thrust clearance
Standard: 0.05 - 0.20 mm (0.002 - 0.007 in)
Maximum: 0.25 mm (0.010 in)





3. Measure the clearance between the 4th gear and bearing.
^ If it exceeds the maximum clearance, reassemble the primary shaft component.

4th gear thrust clearance
Standard: 0.17 - 0.37 mm (0.007 - 0.014 in)
Maximum: 0.42 mm (0.017 in)
pro multis · About Operation CHARM