Crankshaft Position Sensor: Testing and Inspection
CRANKSHAFT POSITION (CKP) SENSOR INSPECTION [MZI-3.7]
Visual Inspection
1. Remove the CKP sensor. Service and Repair
2. Verify that there are no metal shavings on the CKP sensor.
- If there is a malfunction, replace the CKP sensor. Service and Repair
Resistance Inspection
1. Remove the CKP sensor connector.
2. Measure the resistance between the CKP sensor terminals.
- If not within the specification, replace the CKP sensor. Service and Repair
CKP sensor resistance
- 575-790 ohms [18-28 °C {64.4-82.4 °F}]