Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2010 >> 6 V6-3.7L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module: Service and Repair




PCM REMOVAL/INSTALLATION [MZI-3.7]

NOTE:
- For replace the PCM, Setup the M-MDS and perform the PCM configuration. Programming and Relearning

1. Disconnect the negative battery cable.

2. Remove the battery and battery tray. (See Removal and Replacement)

3. Remove all connectors and clips which may interfere with servicing.

4. Loosen the PCM bracket nuts.






5. Remove the PCM from the bracket.






6. When replacing the PCM on the vehicles, perform the following.

- PCM parameter reset. Keyless Entry System Advanced Keyless Entry and Push Button Start System

7. Remove the PCM bracket.






8. Install in the reverse order of removal.

pro multis · About Operation CHARM