Key Interlock Solenoid Inspection

KEY INTERLOCK SOLENOID INSPECTION

CAUTION:
- Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it.
- Do not damage the terminals.

1. Disconnect the key interlock solenoid connector.
a. Disconnect the negative battery cable.

b. Remove the column cover. Service and Repair

c. Disconnect the key interlock solenoid connector.






2. Verify the resistance between key interlock solenoid terminals A and B.






- If there is any malfunction, replace the steering lock. Steering Wheel And Column Removal/Installation - Without Advanced Keyless Entry And Push Button Start System

Key interlock solenoid specification
- 22.95-28.05 ohms