Pinpoint Test - Output State Control (OSC) Equipped Vehicles

-
PINPOINT TESTS - OSC EQUIPPED VEHICLES

Solenoid Operation Chart





a Solenoid state will change if vehicle is moving forward with the selector lever in the NEUTRAL position.

- CB = Clutch brake
- NC = Normally closed
- NH = Normally high
- NL = Normally low
Shift Solenoid A (SSA)





Shift Solenoid B (SSB)





a Reverse is available if the solenoid circuit failed causing transaxle solenoid power control solenoid to remove voltage to all solenoids.Shift Solenoid C (SSC)





Shift Solenoid D (SSD)





a Reverse is available if the solenoid circuit failed causing transaxle solenoid power control solenoid to remove voltage to all solenoids.b No engine braking.Shift Solenoid E (SSE)





a No engine braking.