Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2010 >> Tribute 2WD V6-3.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair



-
CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION - 3.0L









1. With the vehicle in NEUTRAL, position it on a hoist. See Lifting.

2. Disconnect the crankshaft position (CKP) sensor electrical connector.

3. Remove the bolt and the CKP.

- To install, tighten to 10 Nm {1.0 kgf-m, 89 in-lbf}.
- Inspect the O-ring seal and install new as necessary.

4. To install, reverse the removal procedure.

NOTE:Lubricate the CKP O-ring seal with clean engine oil.

pro multis · About Operation CHARM