Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2011 >> 3 L4-2.5L >> Repair and Diagnosis >> A L L Diagnostic Trouble Codes ( DTC ) >> Testing and Inspection >> B Code Charts >> B1317 >> Standard Deployment Control System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Standard Deployment Control System




DTC B1317, B1318 [STANDARD DEPLOYMENT CONTROL SYSTEM]

System Malfunction Location





Detection Condition

WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

- SAS control module power supply voltage is other than 8.1-15.9 V

Possible Causes

- Battery malfunction
- SAS 15 A fuse malfunction
- Open circuit or short to body ground in the wiring harness between the SAS control module and IG1 relay/ignition switch
- Open circuit in the wiring harness between the SAS control module and body ground
- SAS control module malfunction

System Wiring Diagram





Diagnostic Procedure













pro multis · About Operation CHARM