Navigation Check - Car-Navigation System

NAVIGATION CHECK [CAR-NAVIGATION SYSTEM]

Inspection item list










GPS Information

1. Switch the ignition to ACC or ON.

2. Launch the diagnostic mode. Starting Procedure For Diagnostic Mode - Car-Navigation System

3. Select "Navigation Check".

4. Select "GPS Information".

5. Verify the GPS information.
NOTE:
- The GPS reception signal is updated every 1 s.









6. To stop the diagnostic mode, ignition is switched to off.

Vehicle Sensors

1. Switch the ignition to ACC or ON.

2. Launch the diagnostic mode. Starting Procedure For Diagnostic Mode - Car-Navigation System

3. Select "Navigation Check".

4. Select "Vehicle Sensors".

5. Verify the sensor output condition of the sensor being input to the car navigation unit.
NOTE:
- The vehicle signal is updated every 1s.









6. To stop the diagnostic mode, ignition is switched to off.

History

1. Switch the ignition to ACC or ON.

2. Launch the diagnostic mode. Starting Procedure For Diagnostic Mode - Car-Navigation System

3. Select "Navigation Check".

4. Select "History".

5. Verify the displayed content.









6. To stop the diagnostic mode, ignition is switched to off.

Microphone Check

1. Switch the ignition to ACC or ON.

2. Launch the diagnostic mode. Starting Procedure For Diagnostic Mode - Car-Navigation System

3. Select "Navigation Check".

4. Select "Microphone Check".

5. Verify the microphone input condition.









6. To stop the diagnostic mode, ignition is switched to off.