DTC Inspection - Instrument Cluster

DTC INSPECTION [INSTRUMENT CLUSTER]

1. Connect the M-MDS (IDS) to the DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the IDS.

- Select "Self Test".
- Select "Modules".
- Select "IC".

3. Verify the DTC according to the directions on the screen.

- If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

Snapshot data table
NOTE:
- Snapshot data items are not displayed, according to detected DTC.





4. After completion of repairs, clear all DTCs stored in the instrument cluster. Clearing DTC - Instrument Cluster