Ignition Switch
Testing and Inspection- Symptom Related Diagnostic Procedures
- Pinpoint Tests
- Connector End Views - Power Systems
- Pinpoint Test 1: No Power In All Ignition Switch Positions
- Pinpoint Test 2: No Power In Acc
- Pinpoint Test 3: No Power In Run
- Pinpoint Test 4: No Power In Start
- Pinpoint Test 5: DTC B2A20 - Ignition Stuck In Start
- Pinpoint Test 6: DTCs B2844 And U2472 - Ignition Fault And Unexpected Ignition State
- Pinpoint Test 7: DTC B1352 - Ignition Key-In Circuit Failure, The Ignition Key Cannot Be Removed From The Ignition Cylinder
- Component Tests and General Diagnostics
Service and Repair