Connecting Rod, Engine

Connecting Rod

Connecting rod-to-pin clearance - standard 0.004-0.02 mm (0.0001-0.0007 in)
Connecting rod-to-pin Clarence - service limit 0.035 mm (0.0013 in)
Connecting rod pin bore diameter 21.017-21.031 mm (0.827-0.828 in)
Connecting rod length (center-to-center) 138.06-138.14 mm (5.435-5.38 in)
Connecting rod side Clarence 0.100-0.30 mm (0.0039-0.0118 in)
Connecting rod maximum allowed bend 0.038 per 25 mm (0.0014 per 0.984 in)
Connecting rod maximum allowed twist 0.050 per 25 mm (0.0019 per 0.984 in)
Connecting rod journal diameter 49.969-49.991 mm (1.967-1.968 in)
Connecting rod journal maximum taper 0.008 mm (0.0003 in)
Connecting rod journal maximum out-of-round 0.006 mm (0.0002 in)

Connecting Rod Cap Torque

- Tighten the bolts in 2 stages.
- Stage 1: Tighten to 23 Nm {2.3 kgf-m, 17 ft-lbf}.
- Stage 2: Tighten to 43 Nm {4.4 kgf-m, 32 ft-lbf}.