Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2012 >> 2 L4-1.5L >> Repair and Diagnosis >> Lighting and Horns >> Tail Lamp >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Tail Lamp: Service and Repair





REAR COMBINATION LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the screws.






3. To prevent scratches or damage, affix protective tape to the position shown in the figure.
NOTE:
- When the rear combination light is removed from the body, perform the procedure after affixing protective tape to the body. Otherwise, the body could interfere with the rear combination light and cause scratching or damage to the body.





4. Pull the rear combination light in the direction of the arrow shown in the figure, remove the hook from the clip, and remove the pin from the grommet.






5. Rotate the socket in the direction of the arrow shown in the figure and remove it.






6. Remove the wiring harness from the hook.






7. Remove the rear combination light.

8. Install in the reverse order of removal.

pro multis · About Operation CHARM