Clutch Housing and Transaxle Case Components Disassembly
CLUTCH HOUSING AND TRANSAXLE CASE COMPONENTS DISASSEMBLY1. Disassemble in the order indicated in the table.
Oil Seal (Primary Shaft) Disassembly Note
1. Remove the oil seal using a flathead screwdriver.
Bearing Race (Secondary Shaft) Disassembly Note
1. Remove the bearing race by lifting it and the funnel out together.
Oil Seal (Differential) Disassembly Note
1. Remove the oil seal using a flathead screwdriver
Bearing Race (Differential) Disassembly Note
1. Remove the bearing race using the SST.
Reverse Lever Shaft Disassembly Note
1. Remove the roll pin using pliers.
2. Protect the reverse lever shaft with a rag and use pliers to remove the shaft.
Bearing Race (Transaxle Case) Disassembly Note
1. Remove the bearing race using the SST.
Oil Seal (Shift Lever Component) Disassembly Note
1. Remove the oil seal using a flathead screwdriver.