Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2012 >> 3 L4-2.5L >> Repair and Diagnosis >> A L L Diagnostic Trouble Codes ( DTC ) >> Testing and Inspection >> B Code Charts >> B1886 >> Two-Step Deployment Control System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Two-Step Deployment Control System





DTC B1049, B1881, B1882, B1883, B1886 [TWO-STEP DEPLOYMENT CONTROL SYSTEM]

System Malfunction Location





Detection Condition

WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

- Resistance other than 1.10-5.77 ohms detected in passenger-side pre-tensioner seat belt circuit
- Wiring harness between the passenger-side pre-tensioner seat belt and SAS control module has a malfunction

Possible Causes

- Passenger-side pre-tensioner seat belt connector malfunction
- Open or short circuit or short to ground or short to power supply in the wiring harness between the passenger-side pre-tensioner seat belt and SAS control module
- Passenger-side pre-tensioner seat belt malfunction
- SAS control module malfunction

System Wiring Diagram





Diagnostic Procedure





















pro multis · About Operation CHARM