Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2012 >> 6 L4-2.5L >> Repair and Diagnosis >> Lighting and Horns >> Relays and Modules - Lighting and Horns >> Headlamp Control Module >> Service and Repair >> Auto Light/Wiper Control Module Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Auto Light/Wiper Control Module Removal/Installation





AUTO LIGHT/WIPER CONTROL MODULE REMOVAL/INSTALLATION

CAUTION:
- When replacing the auto light/wiper control module, the configuration procedure must be performed before removing the auto light/wiper control module. Replacing the auto light/wiper control module without performing the configuration procedure will result in system malfunction.

NOTE:
- Auto light-off system are integrated with the auto light/wiper control module.

1. Disconnect the negative battery cable.

2. Remove the dashboard under cover (Driver side). Dashboard Under Cover Removal/Installation

3. Remove the nut.






4. Disconnect the connectors.

5. Remove the auto light/wiper control module.

6. Install in the reverse order of removal.

7. Perform the auto light/wiper control module configuration when replacing it. Auto Light/Wiper Control Module Configuration

pro multis · About Operation CHARM