Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2012 >> 6 L4-2.5L >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Steering: Service and Repair





GENERAL PROCEDURES (STEERING)

Wheel and Tire Installation

1. When installing the wheels and tires, tighten the wheel nuts in a criss-cross pattern to the following tightening torque.






Tightening torque
- 88-118 Nm {9.0-12 kgf-m, 65-87 ft-lbf}

Suspension Links Removal/Installation

NOTE:
- To prevent the bushings from being twisted or pinched, perform the procedures with no passengers or luggage aboard the vehicle.

1. For the joint sections with rubber bushings, raise the vehicle using a lift and temporarily tighten the installation nuts and bolts. Afterwards, tighten to the specified torque with the wheels on the ground.

Power Steering Components Removal/Installation

1. If any power steering fluid line has been disconnected anytime during the procedure, add Mazda Genuine ATF M-V or equivalent, bleed the fluid lines, and inspect for leakage after the procedure has been completed.

Connector Disconnection

1. Disconnect the negative battery cable before performing any work that requires handling of connectors. Removal and Replacement

pro multis · About Operation CHARM