Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2012 >> CX-7 AWD L4-2.3L Turbo >> Repair and Diagnosis >> Accessories and Optional Equipment >> Driver/Vehicle Information Display >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Driver/Vehicle Information Display: Service and Repair





MULTI INFORMATION DISPLAY REMOVAL/INSTALLATION

CAUTION:
- When replacing the multi information display, the configuration procedure must be performed before removing the multi information display. The multi information display will not operate normally if it is replaced without performing the configuration procedure.

Without Car-navigation System

1. Perform the multi information display configuration when replacing it. Multi Information Display Configuration

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Dashboard upper garnish Dashboard Upper Garnish Removal/Installation

b. Decoration panel Decoration Panel Removal/Installation

c. Center panel Center Panel Removal/Installation

4. Remove the screws.






5. Lift up the multi information display, then pull it in the direction of the arrow shown in the figure.






6. Disconnect the connector and clips.






7. Remove the multi information display.

8. Install in the reverse order of removal.

With Car-navigation System

1. Perform the multi information display configuration when replacing it. Multi Information Display Configuration

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Dashboard upper garnish Dashboard Upper Garnish Removal/Installation

b. Decoration panel Decoration Panel Removal/Installation

c. Center panel Center Panel Removal/Installation

4. Remove the screws.






5. Lift up the multi information display, then pull it in the direction of the arrow shown in the figure.






6. Disconnect the connectors and clip.






7. Remove the multi information display.

8. Install in the reverse order of removal.

pro multis · About Operation CHARM