Overhaul

REAR BUMPER DISASSEMBLY/ASSEMBLY

Type A

1. Disassemble in the order indicated in the table.










2. Assemble in the reverse order of disassembly.

Type B

1. Disassemble in the order indicated in the table.










2. Assemble in the reverse order of disassembly.

Reflector Removal Note

1. Remove the screw.






2. Pull off the reflector from the rear bumper in the direction shown by the arrow.

Rear Bumper Cover Installation Note

1. After installing the rear bumper cover to the rear bumper, weld the tabs shown in the figure using a soldering iron.






CAUTION:
- Weld the tabs firmly, otherwise the rear bumper cover could fall off if the vehicle vibrates excessively.