Seals and Gaskets: Service and Repair

TRANSFER OIL SEAL REPLACEMENT [AW6AX-EL]

1. On level ground, jack up the vehicle and support it evenly on safety stands.

2. Drain the oil from the transfer. Service and Repair

3. Remove the joint shaft. (See Joint Shaft Removal/Installation)

4. Remove the oil seals using a screwdriver.

5. Using the SST and a hammer, tap each new oil seal.






Substitution SST
- 49 T034 201A
Outer diameter: 59-64 mm {2.33-2.51 in}
Inner diameter: 55 mm {2.17 in} or more
Plate thickness: 2 mm {0.08 in} or more
Length: 5 mm {0.20 in} or more

6. Coat the lip of each oil seal with transfer oil.

7. Install the joint shaft. (See Joint Shaft Removal/Installation)

8. Add the specified amount and type of oil. Service and Repair