Keyless Antenna Removal/Installation

KEYLESS ANTENNA REMOVAL/INSTALLATION

Interior, Front

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement

2. Remove the following parts:
a. Upper panel Upper Panel Removal/Installation

b. Shift knob (MTX) Service and Repair

c. Selector lever knob (ATX) Service and Repair

d. Shift panel Shift Panel Removal/Installation

e. Side wall Side Wall Removal/Installation

f. Center panel Center Panel Removal/Installation

g. Audio unit Audio Unit Removal/Installation

h. Rear heat duct (1) Service and Repair

3. Disconnect the connector.






4. Remove the nuts.

5. Remove the keyless antenna.

6. Install in the reverse order of removal.

Interior, Rear

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement

2. Remove the rear seat cushion. Rear Seat Cushion Removal/Installation

3. Disconnect the connector.






4. Remove the nuts.

5. Remove the keyless antenna.

6. Install in the reverse order of removal.

Exterior, Rear

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement

2. Remove the rear combination light. (See Service and Repair)

3. Remove the rear bumper. Removal and Replacement

4. Remove the nuts.






5. Disconnect the connector.

6. Remove the keyless antenna.

7. Install in the reverse order of removal.

Exterior, LF/RF

NOTE:
- The keyless antenna (vehicle exterior, LF/RF) is built into the front outer handle. Service and Repair