Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2012 >> Mazdaspeed3 L4-2.3L Turbo >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Rotor/Disc >> Service and Repair >> Front Brake (Disc) Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Brake (Disc) Removal/Installation





FRONT BRAKE (DISC) REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo]

1. Remove in the order indicated in the table.

2. Install in the reverse order of removal.

3. After installation, pump the brake pedal a few times and verify that the brakes do not drag.









Retaining Clip Removal Note

1. Move the retaining clip in the direction shown by the arrow using a flathead screwdriver and remove it from the caliper.






Disc Pad Installation Note

1. Clean the exposed area of the piston.

2. Push the piston in using the SST.






3. Install the disc pad to the caliper.

Brake Hose Installation Note

1. Install the brake hose to the caliper.

2. Tighten the flare nut while holding the brake hose at point A with a spanner or equivalent.






3. Verify that the brake hose is not twisted.

pro multis · About Operation CHARM