Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2012 >> Mazdaspeed3 L4-2.3L Turbo >> Repair and Diagnosis >> Lighting and Horns >> Turn Signals >> Turn Signal Lamp >> Service and Repair >> Front Combination Light Bracket Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Combination Light Bracket Replacement





FRONT COMBINATION LIGHT BRACKET REPLACEMENT

NOTE:
- Verify that the front combination light is not damaged before using the repair bracket for installation when the original brackets are damaged. If the front combination light component is damaged, replace the light as a single unit.

1. Cut off the front combination light bracket at the locations shown in the figure.






2. Smoothen the cut surfaces using sandpaper so that the repair bracket can be properly installed.

3. Cut the projection at the position shown in the figure.






4. After disconnecting the projection, verify that the projection is less than 1mm {0.04 in} from the front combination light housing.

5. Securely attach the repair bracket to the front combination light using the screws.






pro multis · About Operation CHARM