CAMSHAFT OIL CLEARANCE INSPECTION [WL-C, WE-C]

id0110b6501600

1.  Position a plastigage on top of the journals in the axial direction.

2.  Install the camshaft cap. (See CYLINDER HEAD ASSEMBLY (II) [WL-C, WE-C].)

3.  Remove the camshaft cap. (See CYLINDER HEAD DISASSEMBLY(I) [WL-C, WE-C].)

4.  Measure the oil clearance. Replace the cylinder head if necessary.

bwl1ge00000231

Standard camshaft clearance
No.1: 0.035—0.081 mm {0.0014—0.0031 in}
No.2—4: 0.065—0.111 mm {0.0026—0.0043 in}
No.5: 0.056—0.081 mm {0.0014—0.0031 in}
Maximum camshaft clearance
No.1: 0.12 mm {0.0047 in}
No.2—4: 0.15 mm {0.0059 in}
No.5: 0.16 mm {0.0063 in}