NO.2 WILL NOT CRANK [F2]

id010394912200

2

WILL NOT CRANK
DESCRIPTION
The starter does not work.
POSSIBLE CAUSE
•  Open circuit between ignition switch and starter
•  Starter malfunction
•  Seized/hydrolocked engine or flywheel

Diagnostic procedure

STEP

INSPECTION

RESULTS

ACTION
1
Inspect for following:
•  Battery connection
•  Battery condition
•  Fuses
Are all items normal?
Yes
Go to the next step.
No
Service as necessary.
Repeat Step 1.
2
Is clicking sound heard from starter when ignition switch is turned to START?
Yes
Go to the next step.
No
Go to Step 4.
3
Inspect starting system.
(See STARTER INSPECTION [F2].)
Is starting system normal?
Yes
Inspect for seized/hydrolocked engine or flywheel.
(See FLYWHEEL INSPECTION [M15M-D, R15M-D, R15MX-D].)
No
Repair or replace components as required.
4
Do any other electrical accessories work?
Yes
Go to the next step.
No
Inspect charging system.
(See CHARGING SYSTEM LOCATION INDEX [F2].)
5
Connect the M-MDS to the DLC-2.
Turn the ignition switch to the ON position (Engine off).
Retrieve any DTCs.
Are there any DTCs displayed?
Yes
DTC is displayed:
•  Go to appropriate the DTC inspection.
No
No DTC is displayed:
•  Inspect instrument cluster operation.
6
•  Verify test results.
―  If normal, return to diagnostic index to service any additional symptoms.
―  If malfunction remains, inspect related Service Information and perform repair or diagnosis.
•  If vehicle is repaired, troubleshooting completed.
•  If vehicle is not repaired or additional diagnostic information is not available, replace the PCM.