FRONT DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION

id091400800400

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)

(2)  Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION.)

(3)  Remove the glass run channel. (See FRONT DOOR UNIT REMOVAL/INSTALLATION)

(4)  Remove the glass guide. (See FRONT DOOR UNIT REMOVAL/INSTALLATION)

3.  Disconnect the connector. (vehicle with power door lock system)

4.  Remove in the order indicated in the table.

dcf914zwc003

1	Screw
2	Front door latch and lock actuator

5.  Install in the reverse order of removal.