REAR DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION

id091400800500

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION.)

(2)  Rear door glass (See REAR DOOR GLASS AND REAR WINDOW REGULATOR REMOVAL/INSTALLATION.)

(3)  Glass run channel (See REAR DOOR UNIT REMOVAL/INSTALLATION.)

(4)  Glass guide (See REAR DOOR UNIT REMOVAL/INSTALLATION.)

3.  Disconnect the connector. (Vehicle with power door lock system)

4.  Remove in the order indicated in the table.

dfc914zwc022

1	Screw
2	Rear door latch and lock actuator

5.  Install in the reverse order of removal.