Differential oil replacement

1. Front final drive lubricant draining procedure

1) Raise the vehicle.

2) Dispose of the differential oil in the oil catcher tank.

3) Remove the filler plug and gasket from the front drive axle.

4) Remove the drain plug and gasket from the front drive axle, and drain the differential oil from the front drive axle.

2. Rear final drive lubricant draining procedure

1) Raise the vehicle.

2) Remove the filler plug and gasket from the rear axle.

3) Remove the drain plug and gasket from the rear axle, and drain the differential oil from the rear axle.

1. Regarding lubricant refill amount and type

For the lubricant refill amount, refer to the following.

Refer to "204.Driveline, Axle 17B.Maintenance Information primary specifications of driveline, axle".

For the lubricant type, refer to the following.

Refer to "201.General Information 14B.Vehicle Information recommended fluids, lubricants and diesel fuels".

2. Front final drive lubricant refill procedure

1) Install the drain plug and gasket to the front drive axle.

Tightening torque: 50 N・m { 5.1 kgf・m / 37 lb・ft }

2) Add differential oil to the front drive axle.

Legend

3) Install the filler plug and gasket to the front drive axle.

Tightening torque: 50 N・m { 5.1 kgf・m / 37 lb・ft }

4) Lower the vehicle.

3. Rear final drive lubricant refill procedure

1) Install the drain plug and gasket to the rear axle.

Tightening torque: 78 N・m { 8.0 kgf・m / 58 lb・ft }

2) Replenish the differential oil in the rear axle.

Legend

3) Install the filler plug and gasket to the rear axle.

Tightening torque: 78 N・m { 8.0 kgf・m / 58 lb・ft }

4) Lower the vehicle.