1. DTC P0116 description
The engine coolant temperature sensor is installed near the thermostat housing. The engine coolant temperature sensor is a variable resistor and measures the temperature of the engine coolant. If the ECM detects that the difference of the engine coolant temperature is less than the calculated range under the predetermined conditions, the DTC is set. This DTC only runs once per ignition cycle within the effective conditions.
2. Condition for setting DTC P0116
Condition for running the DTC
- The battery voltage is 9 to 16 V.
- The ignition switch is ON.
- The intake air temperature is 110°C {230 °F} or less.
- The vehicle driving time is 2 minutes or more.
- The engine speed is 1150 rpm or more for 2 minutes or more.
- The engine runtime is more than 6 minutes.
- DTCs P0117, P0118, P0201, P0202, P0203, P0204, P0500, P060B, P0697, P06AF, P1261, P2146, and P2149 are not set.
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC P0117 Engine Coolant Temperature Sensor Circuit Low".
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC P0118 Engine Coolant Temperature Sensor Circuit High".
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC P0201 Injector Circuit - Cylinder 1".
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC P0202 Injector Circuit - Cylinder 2".
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC P0203 Injector Circuit - Cylinder 3".
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC P0204 Injector Circuit - Cylinder 4".
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC P0500 Vehicle Speed Sensor".
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC P060B Internal Control Module A/D Processing Performance".
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC P0697 Sensor Reference Voltage 3 Circuit".
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC P06AF EDU (Electric Driver Unit) Injector Custom IC".
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC P1261 Injector Charge Circuit Low Voltage".
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC P2146 Fuel Injector Group 1 Supply Voltage Circuit".
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC P2149 Fuel Injector Group 2 Supply Voltage Circuit".
Condition for setting the DTC
- The ECM detects that the difference between the maximum and minimum engine coolant temperatures is 2.5°C {5°F} or less.
3. Action taken when DTC P0116 sets
- Euro4: The ECM illuminates the MIL. Refer to Action taken when DTC sets - Type B (Euro4).
- Except Euro4: The ECM illuminates the check engine warning light. Refer to Action taken when DTC sets - Type B (Except Euro4).
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC type definitions".
4. Condition for clearing DTC P0116
- Euro4: Refer to Condition for clearing the MIL/DTC - Type A or Type B (Euro4).
- Except Euro4: Refer to Condition for clearing the check engine warning light/DTC - Type A or Type B (Except Euro4).
Refer to "51.Engine Control 1A.Troubleshooting(4JJ3 without DPD) DTC type definitions".