DTC P0202 (Flash Code 272) Injector Circuit - Cylinder 2 (RZ4E-TC)

1. DTC P0202 description

The ECM calculates the optimum fuel injection ON time based on the data sent from various sensors. The ECM supplies high voltage to the injector charge voltage circuit, grounds the injector solenoid control circuit, and drives the cylinder injectors. If the ECM detects an abnormal condition in the cylinder No. 2 injector circuit, the DTC is set.

2. Condition for setting DTC P0202

Condition for running the DTC

  • The battery voltage is 9 to 16 V.
  • The ignition voltage is 9 to 16 V.
  • The ignition switch is ON.
  • The engine is running.
  • DTCs P0203, P06AF, P1262, and P2149 are not set.

Refer to "51.Engine Control 1A.Troubleshooting(RZ4E-TC) DTC P0203 (Flash Code 273) Injector Circuit - Cylinder 3".

Refer to "51.Engine Control 1A.Troubleshooting(RZ4E-TC) DTC P06AF (Flash Code 277) EDU (Electric Driver Unit) Injector Custom IC".

Refer to "51.Engine Control 1A.Troubleshooting(RZ4E-TC) DTC P1262 (Flash Code 34) Injector Positive Voltage Control Circuit Group 2".

Refer to "51.Engine Control 1A.Troubleshooting(RZ4E-TC) DTC P2149 (Flash Code 159) Fuel Injector Group 2 Supply Voltage Circuit".

Condition for setting the DTC

  • The ECM detects an open circuit in the injector solenoid circuit for 2.6 seconds or more.

3. Action taken when DTC P0202 sets

  • Euro4: The ECM illuminates the MIL. Refer to Action taken when DTC sets - Type A (Euro4).
  • Except Euro4: The ECM illuminates the check engine warning light. Refer to Action taken when DTC sets - Type A (Except Euro4).

Refer to "51.Engine Control 1A.Troubleshooting(RZ4E-TC) DTC type definitions".

  • The ECM limits the fuel injection quantity.
  • The ECM inhibits pre-injection.
  • The ECM inhibits the cruise control.

4. Condition for clearing DTC P0202

  • Euro4: Refer to Condition for clearing the MIL/DTC - Type A or Type B (Euro4).
  • Except Euro4: Refer to Condition for clearing the check engine warning light/DTC - Type A or Type B (Except Euro4).

Refer to "51.Engine Control 1A.Troubleshooting(RZ4E-TC) DTC type definitions".