DTC B1E0E[54] Electronic Key Not Programmed (Wireless Access Module (Hi-version [Passive Entry and Start System]))

1. DTC B1E0E[54] description

If using an electronic key, the electronic key ID must be programmed in the wireless access module. The wireless access module sets the DTC if the electronic key ID is not programmed.

2. Condition for setting DTC B1E0E[54]

  • The wireless access module detects that the electronic key ID is not programmed.

3. Action taken when DTC B1E0E[54] sets

  • If the power mode is set to ACC or ON, the key monitor warning light remains ON.
Copyright Mazda Motor Corporation. All rights reserved.