1. DTC P0700 description
The TCM requests the ECM to illuminate the MIL via the CAN when the TCM sets the MIL illumination request DTC. If the ECM detects the MIL illumination request signal, the DTC is set.
2. Condition for setting DTC P0700
Condition for running the DTC
- The ignition switch is ON.
Condition for setting the DTC
- The ECM detects that the TCM requests illumination of the MIL.
3. Action taken when DTC P0700 sets
- Euro4: The ECM illuminates the MIL. Refer to Action taken when DTC sets - Type A (Euro4).
- Except Euro4: The ECM illuminates the check engine warning light. Refer to Action taken when DTC sets - Type A (Except Euro4).
Refer to "51.Engine Control 1A.Troubleshooting(RZ4E-TC) DTC type definitions".
4. Condition for clearing DTC P0700
- Euro4: Refer to Condition for clearing the MIL/DTC - Type A or Type B (Euro4).
- Except Euro4: Refer to Condition for clearing the check engine warning light/DTC - Type A or Type B (Except Euro4).
Refer to "51.Engine Control 1A.Troubleshooting(RZ4E-TC) DTC type definitions".