Refer to "75.Driver Assistance System 10W.Troubleshooting(Stereo Camera) diagnostic system check-stereo camera".
1) Connect the scan tool.
2) Turn ON the ignition switch.
3) Observe the DTC information with a scan tool. Is a DTC set?
Yes
=>Go to Stereo camera learning.
No
Go to Intermittent conditions of stereo camera.
Refer to "233.Driver Assistance System 46D.Symptom(Stereo Camera) intermittent conditions of stereo camera".
1) Perform the stereo camera learning.
Refer to "9.Body, Cab, Accessories 9E.Instrumentation, Driver Info. stereo camera writing".
Procedure completion
1) Clear the DTC with a scan tool.
2) Turn OFF the ignition switch for 30 seconds or more.
3) Turn ON the ignition switch.
4) Observe the DTC information with a scan tool.