FUEL INJECTOR INSPECTION [SKYACTIV-D 2.2]

id0114z7800700

Caution

•  If a hand or tool touches a fuel injector terminal or fuel injector connector terminal, the fuel injector might be damaged. To prevent damage to a fuel injector, do not touch the terminals. (Fuel injector (6pin type))

•  If high-voltage generating parts or components and electronic devices come near a fuel injector, the fuel injector could be damaged. To prevent damage to a fuel injector, always keep high-voltage generating parts or components and electronic devices away from it. (Fuel injector (6pin type))

Note

•  A fuel injector cannot be inspected as a single unit.

•  If a DTC is recorded, but there is no malfunction with a terminal or wiring harness, replace the fuel injector.

1.  Connect the M-MDS to the DLC-2.

2.  Perform the KOER self test. (See KOEO/KOER SELF TEST [PCM (SKYACTIV-D 2.2)].)

•  If DTC P0201:00, P0202:00, P0203:00, or P0204:00 is recorded, repair the malfunctioning location according to the applicable DTC troubleshooting.(See DTC P0201:00 [PCM (SKYACTIV-D 2.2)].)(See DTC P0202:00 [PCM (SKYACTIV-D 2.2)].)(See DTC P0203:00 [PCM (SKYACTIV-D 2.2)].)(See DTC P0204:00 [PCM (SKYACTIV-D 2.2)].)

―  If a malfunction cannot be verified with a terminal or wiring harness by following the applicable DTC troubleshooting, repair or replace the fuel injector.(See FUEL INJECTOR REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)

•  If no DTC is detected, the fuel injector is normal.