DTC TABLE [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)]

id0802g7080700

Caution

•  When DTCs not shown in the DTC table are displayed, perform the inspection for DTCs not shown in the DTC table. (See Inspection for DTCs not usually displayed so the related function is not equipped.)

DTC				System malfunction location	Fail-safe function	Drive cycle	Self test type*1	Memory function	Page
M-MDS display	Air bag system warning light
	Flashing pattern		Priority ranking
B0001:11	19		18	Driver-side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B0001:11/B0001:12/B0001:13/B0001:19/B0001:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0001:12				Driver-side air bag module circuit short to power supply	—	—	C, D	×
B0001:13				Driver-side air bag module circuit open circuit or resistance high	—	—	C, D	×
B0001:19				Short circuit to driver-side air bag module and other air bag module circuits	—	—	C, D	×
B0001:1A				Driver-side air bag module circuit resistance low	—	—	C, D	×
B0001:55	54		7	Configuration setting error (driver-side air bag module structural malfunction)	—	—	C, D	×	(See DTC B0001:55/B0010:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
[B0002:11]	19		18	Driver-side air bag module (inflator No.2) circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B0002:12]				Driver-side air bag module (inflator No.2) circuit short to power supply	—	—	C, D	×
[B0002:13]				Driver-side air bag module (inflator No.2) circuit open circuit or resistance high	—	—	C, D	×
[B0002:19]				Short circuit to driver-side air bag module (inflator No.2) and other air bag module circuits	—	—	C, D	×
[B0002:1A]				Driver-side air bag module (inflator No.2) circuit resistance low	—	—	C, D	×
[B0002:55]	54		7	Configuration setting error (driver-side air bag module (inflator No.2) structural malfunction)	—	—	C, D	×
B0003:53	―	Flashing	4	Operation (deployment) inhibited	—	—	C, D	×	(See DTC B0003:53 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0010:11	21		17	Passenger-side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B0010:11/B0010:12/B0010:13/B0010:19/B0010:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0010:12				Passenger-side air bag module circuit short to power supply	—	—	C, D	×
B0010:13				Passenger-side air bag module circuit open circuit or resistance high	—	—	C, D	×
B0010:19				Short circuit to passenger-side air bag module and other air bag module circuits	—	—	C, D	×
B0010:1A				Passenger-side air bag module circuit resistance low	—	—	C, D	×
B0010:55	54		7	Configuration setting error (passenger-side air bag module structural malfunction)	—	—	C, D	×	(See DTC B0001:55/B0010:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
[B0011:11]	21		17	Passenger-side air bag module (inflator No.2) circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B0011:12]				Passenger-side air bag module (inflator No.2) circuit short to power supply	—	—	C, D	×
[B0011:13]				Passenger-side air bag module (inflator No.2) circuit open circuit or resistance high	—	—	C, D	×
[B0011:19]				Short circuit to passenger-side air bag module (inflator No.2) and other air bag module circuits	—	—	C, D	×
[B0011:1A]				Passenger-side air bag module (inflator No.2) circuit resistance low	—	—	C, D	×
[B0011:55]	54		7	Configuration setting error (passenger-side air bag module (inflator No.2) structural malfunction)	—	—	C, D	×
B0050:55	54		7	Configuration setting error (driver-side buckle switch structural malfunction)	—	—	C, D	×	(See DTC B0050:55/B0052:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0052:55				Configuration setting error (passenger-side buckle switch structural malfunction)	—	—	C, D	×
[B0072:11]	34		19	Passenger-side lap pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B0072:12]				Passenger-side lap pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
[B0072:13]				Passenger-side lap pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
[B0072:19]				Short circuit to passenger-side lap pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
[B0072:1A]				Passenger-side lap pre-tensioner seat belt circuit resistance low	—	—	C, D	×
[B0072:55]	54		7	Configuration setting error (passenger-side lap pre-tensioner seat belt structural malfunction)	—	—	C, D	×
B0094:11	42		10	Driver-side crash zone sensor circuit short to body ground	—	—	C, D	×	(See DTC B0094:11/B0094:12/B0094:29/B0094:2B/B0094:4A/B0094:87/B0094:96 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B0094:12				Driver-side crash zone sensor circuit short to power supply	—	—	C, D	×
B0094:29				Driver-side crash zone sensor internal malfunction	—	—	C, D	×
B0094:2B				Short circuit to driver-side crash zone sensor and other air bag sensor circuits	—	—	C, D	×
B0094:4A				Driver-side crash zone sensor ID error (assembly incorrect)	—	—	C, D	×
B0094:87				Signal reception error from driver-side crash zone sensor	—	—	C, D	×
B0094:96				Driver-side crash zone sensor internal malfunction	—	—	C, D	×
B0094:55	54		7	Configuration setting error (driver-side crash zone sensor structural malfunction)	—	—	C, D	×	(See DTC B0094:55/B1417:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
[B00A0:09]	16		29	Occupant classification sensor internal malfunction	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00A0:28]				Occupant classification sensor calibration check error	—	—	D	×
[B00A0:4A]	15		6	Occupant classification sensor ID mismatch	—	—	C, D	×
[B00A0:54]	16		29	Occupant classification sensor calibration setting not set	—	—	C, D	×
[B00A0:55]	54		7	Configuration setting error (occupant classification sensor structural malfunction)	—	—	C, D	×
[B00A0:81]	16		29	Occupant classification sensor memory check sum error	—	—	C, D	×
[B00A0:87]				Signal reception error from occupant classification sensor	—	—	C, D	×
[B00A0:8F]				Seat weight sensor circuit open circuit or short to power supply	—	—	C, D	×
[B00B5:11]	49		31	Seat track position sensor circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00B5:12]				Seat track position sensor circuit short to power supply	—	—	C, D	×
[B00B5:13]				Seat track position sensor circuit open	—	—	C, D	×
[B00B5:1D]				Seat track position sensor circuit current out of range	—	—	C, D	×
[B00B5:2B]				Short circuit to seat track position sensor and other air bag sensor circuits	—	—	C, D	×
[B00B0:55]	54		7	Configuration setting error (seat track position sensor structural malfunction)	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00B5:55]	54		7	Configuration setting error (seat track position sensor structural malfunction)	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00C0:93]	16		29	Malfunction signal received from occupant classification sensor (sensor mat malfunction)	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00C1:93]				Malfunction signal received from occupant classification sensor (sensor shield mat malfunction)	—	—	C, D	×
B00D2:01	―	―	―	Air bag system warning light malfunction	—	—	C, D	×	(See DTC B00D2:01 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B00D2:29				Communication error with instrument cluster (air bag system warning light status mis-matched)	—	—	C, D	×	(See DTC B00D2:29 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
[B00D5:01]	18		30	PAD indicator circuit open circuit or short to power supply	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B00D5:29]				Communication error with instrument cluster (PAD indicator light status mis-matched)	—	—	C, D	×
[B00D5:55]				Configuration setting error (PAD indicator structural malfunction)	—	—	C, D	×
B1011:95	58		8	SAS control module connectors are poorly connected	—	—	C, D	×	(See DTC B1011:95 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B10FD:11	43		14	Driver-side side air bag sensor circuit short to body ground	—	—	C, D	×	(See DTC B10FD:11/B10FD:12/B10FD:29/B10FD:2B/B10FD:4A/B10FD:87/B10FD:96 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B10FD:12				Driver-side side air bag sensor circuit short to power supply	—	—	C, D	×
B10FD:29				Driver-side side air bag sensor internal malfunction	—	—	C, D	×
B10FD:2B				Short circuit to driver-side side air bag sensor and other air bag sensor circuits	—	—	C, D	×
B10FD:4A				Driver-side side air bag sensor ID error (assembly incorrect)	—	—	C, D	×
B10FD:87				Signal reception error from driver-side side air bag sensor	—	—	C, D	×
B10FD:96				Driver-side side air bag sensor internal malfunction	—	—	C, D	×
B10FD:55	54		7	Configuration setting error (driver-side side air bag sensor structural malfunction)	—	—	C, D	×	(See DTC B10FD:55/B10FE:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B10FE:11	44		13	Passenger-side side air bag sensor circuit short to body ground	—	—	C, D	×	(See DTC B10FE:11/B10FE:12/B10FE:29/B10FE:2B/B10FE:4A/B10FE:87/B10FE:96 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B10FE:12				Passenger-side side air bag sensor circuit short to power supply	—	—	C, D	×
B10FE:29				Passenger-side side air bag sensor internal malfunction	—	—	C, D	×
B10FE:2B				Short circuit to passenger-side side air bag sensor and other air bag sensor circuits	—	—	C, D	×
B10FE:4A				Passenger-side side air bag sensor ID error (assembly incorrect)	—	—	C, D	×
B10FE:87				Signal reception error from passenger-side side air bag sensor	—	—	C, D	×
B10FE:96				Passenger-side side air bag sensor internal malfunction	—	—	C, D	×
B10FE:55	54		7	Configuration setting error (passenger-side side air bag sensor structural malfunction)	—	—	C, D	×	(See DTC B10FD:55/B10FE:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1126:11	22		24	Driver-side side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1126:11/B1126:12/B1126:13/B1126:19/B1126:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1126:12				Driver-side side air bag module circuit short to power supply	—	—	C, D	×
B1126:13				Driver-side side air bag module circuit open circuit or resistance high	—	—	C, D	×
B1126:19				Short circuit to driver-side side air bag module and other air bag module circuits	—	—	C, D	×
B1126:1A				Driver-side side air bag module circuit resistance low	—	—	C, D	×
B1126:55	54		7	Configuration setting error (driver-side side air bag module structural malfunction)	—	—	C, D	×	(See DTC B1126:55/B1127:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1127:11	23		23	Passenger-side side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1127:11/B1127:12/B1127:13/B1127:19/B1127:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1127:12				Passenger-side side air bag module circuit short to power supply	—	—	C, D	×
B1127:13				Passenger-side side air bag module circuit open circuit or resistance high	—	—	C, D	×
B1127:19				Short circuit to passenger-side side air bag module and other air bag module circuits	—	—	C, D	×
B1127:1A				Passenger-side side air bag module circuit resistance low	—	—	C, D	×
B1127:55	54		7	Configuration setting error (passenger-side side air bag module structural malfunction)	—	—	C, D	×	(See DTC B1126:55/B1127:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1128:11	24		26	Driver-side curtain air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1128:11/B1128:12/B1128:13/B1128:19/B1128:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1128:12				Driver-side curtain air bag module circuit short to power supply	—	—	C, D	×
B1128:13				Driver-side curtain air bag module circuit open circuit or resistance high	—	—	C, D	×
B1128:19				Short circuit to driver-side curtain air bag module and other air bag module circuits	—	—	C, D	×
B1128:1A				Driver-side curtain air bag module circuit resistance low	—	—	C, D	×
B1128:55	54		7	Configuration setting error (driver-side curtain air bag module structural malfunction)	—	—	C, D	×	(See DTC B1128:55/B1129:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1129:11	25		25	Passenger-side curtain air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1129:11/B1129:12/B1129:13/B1129:19/B1129:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1129:12				Passenger-side curtain air bag module circuit short to power supply	—	—	C, D	×
B1129:13				Passenger-side curtain air bag module circuit open circuit or resistance high	—	—	C, D	×
B1129:19				Short circuit to passenger-side curtain air bag module and other air bag module circuits	—	—	C, D	×
B1129:1A				Passenger-side curtain air bag module circuit resistance low	—	—	C, D	×
B1129:55	54		7	Configuration setting error (passenger-side curtain air bag module structural malfunction)	—	—	C, D	×	(See DTC B1128:55/B1129:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1193:00	13		3	SAS control module operation (deployment)	—	—	C, D	×	(See DTC B1193:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
[B1196:29]	45		16	Driver-side side air bag sensor No.2 internal malfunction	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1196:4A]				Driver-side side air bag sensor No.2 ID error (assembly incorrect)	—	—	C, D	×
[B1196:87]				Signal reception error from driver-side side air bag sensor No.2	—	—	C, D	×
[B1196:96]				Driver-side side air bag sensor No.2 internal malfunction	—	—	C, D	×
[B1196:55]	54		7	Configuration setting error (driver-side side air bag sensor No.2 structural malfunction)	—	—	C, D	×
[B1197:29]	46		15	Passenger-side side air bag sensor No.2 internal malfunction	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1197:4A]				Passenger-side side air bag sensor No.2 ID error (assembly incorrect)	—	—	C, D	×
[B1197:87]				Signal reception error from passenger-side side air bag sensor No.2	—	—	C, D	×
[B1197:96]				Passenger-side side air bag sensor No.2 internal malfunction	—	—	C, D	×
[B1197:55]	54		7	Configuration setting error (passenger-side side air bag sensor No.2 structural malfunction)	—	—	C, D	×
B1206:00	―	―	―	SAS control module collision judgement signal output (fuel cut off signal output)	―	―	C, D	×	(See DTC B1206:00/B143A:00/B1A55:00/U2107:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1211:11	38		22	Driver-side pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1211:11/B1211:12/B1211:13/B1211:19/B1211:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1211:12				Driver-side pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1211:13				Driver-side pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1211:19				Short circuit to driver-side pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1211:1A				Driver-side pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1211:55	54		7	Configuration setting error (driver-side pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1211:55, B1214:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1214:11	39		21	Passenger-side pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1214:11/B1214:12/B1214:13/B1214:19/B1214:1A [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1214:12				Passenger-side pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1214:13				Passenger-side pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1214:19				Short circuit to passenger-side pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1214:1A				Passenger-side pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1214:55	54		7	Configuration setting error (passenger-side pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1211:55, B1214:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
[B1226:02]	36		12	Signal reception error from driver or passenger-side pressure sensor	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1226:29]				Driver-side pressure sensor internal malfunction	—	—	C, D	×
[B1226:4A]				Driver-side pressure sensor ID error (assembly incorrect)	—	—	C, D	×
[B1226:87]				Signal reception error from driver-side pressure sensor	—	—	C, D	×
[B1226:96]				Driver-side pressure sensor internal malfunction	—	—	C, D	×
[B1226:55]	54		7	Configuration setting error (driver-side pressure sensor structural malfunction)	—	—	C, D	×
[B1227:29]	37		11	Passenger-side pressure sensor internal malfunction	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1227:4A]				Passenger-side pressure sensor ID error (assembly incorrect)	—	—	C, D	×
[B1227:87]				Signal reception error from passenger-side pressure sensor	—	—	C, D	×
[B1227:96]				Passenger-side pressure sensor internal malfunction	—	—	C, D	×
[B1227:55]	54		7	Configuration setting error (passenger-side pressure sensor structural malfunction)	—	—	C, D	×
[B1228:11]	35		20	Driver-side lap pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1228:12]				Driver-side lap pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
[B1228:13]				Driver-side lap pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
[B1228:19]				Short circuit to driver-side lap pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
[B1228:1A]				Driver-side lap pre-tensioner seat belt circuit resistance low	—	—	C, D	×
[B1228:55]	54		7	Configuration setting error (driver-side lap pre-tensioner seat belt structural malfunction)	—	—	C, D	×
[B1410:11]	33		28	Driver-side rear pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1410:12]				Driver-side rear pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
[B1410:13]				Driver-side rear pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
[B1410:19]				Short circuit to driver-side rear pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
[B1410:1A]				Driver-side rear pre-tensioner seat belt circuit resistance low	—	—	C, D	×
[B1410:55]	54		7	Configuration setting error (driver-side rear pre-tensioner seat belt structural malfunction)	—	—	C, D	×
[B1412:11]	32		27	Passenger-side rear pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1412:12]				Passenger-side rear pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
[B1412:13]				Passenger-side rear pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
[B1412:19]				Short circuit to passenger-side rear pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
[B1412:1A]				Passenger-side rear pre-tensioner seat belt circuit resistance low	—	—	C, D	×
[B1412:55]	54		7	Configuration setting error (passenger-side rear pre-tensioner seat belt structural malfunction)	—	—	C, D	×
B1417:11	41		9	Passenger-side crash zone sensor circuit short to body ground	—	—	C, D	×	(See DTC B1417:11/B1417:12/B1417:29/B1417:2B/B1417:4A/B1417:87/B1417:96 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1417:12				Passenger-side crash zone sensor circuit short to power supply	—	—	C, D	×
B1417:29				Passenger-side crash zone sensor internal malfunction	—	—	C, D	×
B1417:2B				Short circuit to passenger-side crash zone sensor and other air bag sensor circuits	—	—	C, D	×
B1417:4A				Passenger-side crash zone sensor ID error (assembly incorrect)	—	—	C, D	×
B1417:87				Signal reception error from passenger-side crash zone sensor	—	—	C, D	×
B1417:96				Passenger-side crash zone sensor internal malfunction	—	—	C, D	×
B1417:55	54		7	Configuration setting error (Passenger-side crash zone sensor structural malfunction)	—	—	C, D	×	(See DTC B0094:55/B1417:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B143A:00	―	―	―	SAS control module collision judgement signal output (collision detection signal output)	—	—	C, D	×	(See DTC B1206:00/B143A:00/B1A55:00/U2107:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1485:55	54		7	Configuration setting error (occupancy sensor structural malfunction)	—	—	C, D	×	(See DTC B1485:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
B1A55:00	―	―	―	SAS control module collision judgement signal output (collision detection signal for MAZDA ERA-GLONASS output)	—	—	C, D	×	(See DTC B1206:00/B143A:00/B1A55:00/U2107:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
C0061:29	―	―	―	Low-G sensor (lateral-G) in SAS control module (internal circuit disabled)	—	—	C, D	×	(See DTC C0061:29/C0062:29/C0063:29 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
C0062:29				Low-G sensor (forward-G) in SAS control module (internal circuit disabled)	—	—	C, D	×
C0063:29				Yaw rate sensor in SAS control module (internal circuit disabled)	—	—	C, D	×
U0001:88	―	Continuously illuminated	1	Unit communication error (HS-CAN)	—	—	C, D	×	(See DTC U0001:88/U0100:00/U0101:00/U0155:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U0100:00	14		5	Communication error with PCM	—	—	C, D	×
U0101:00				Communication error with TCM	—	—	C, D	×
U0155:00				Communication error with instrument cluster	—	—	C, D	×
U2100:00	―	Flashing	4	Configuration not set	—	—	C, D	×	(See DTC U2100:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U2107:00	―	―	―	SAS control module collision judgement signal output (ESS signal output)	―	―	C, D	×	(See DTC B1206:00/B143A:00/B1A55:00/U2107:00 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U3000:49	12		2	SAS control module internal malfunction	—	—	C, D	×	(See DTC U3000:49 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
	―	Continuously illuminated	1
U3003:16	―	Continuously illuminated	1	SAS control module power supply voltage decreases (8 V or less)	—	—	C, D	×	(See DTC U3003:16/U3003:17 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
U3003:17				SAS control module power supply voltage increases (16 V or more)	—	—	C, D	×

Inspection for DTCs not usually displayed so the related function is not equipped

Diagnostic procedure

Step	Inspection		Action
1	INSPECT FOR ANY DTC DISPLAYED SIMULTANEOUSLY •  Is any DTC not within [ ] in the DTC table displayed simultaneously?	Yes	Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)
		No	Go to the next step.
2	VERIFY IF MALFUNCTION CAUSED BY TEMPORARY MALFUNCTION IN SAS CONTROL MODULE •  Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].) •  Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].) •  Are the same DTCs displayed?	Yes	Go to the next step.
		No	DTC troubleshooting completed.
3	VERIFY IF MALFUNCTION CAUSED BY CONFIGURATION ERROR •  Perform the SAS control module configuration using the M-MDS. (See SAS CONTROL MODULE CONFIGURATION (USING AS-BUILT DATA) [STANDARD DEPLOYMENT CONTROL SYSTEM].) •  Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].) •  Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].) •  Are the same DTCs displayed?	Yes	Re-perform the configuration, then perform the DTC inspection. •  If the same DTC is displayed, replace the SAS control module. (See SAS CONTROL MODULE REMOVAL/INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM].)
		No	DTC troubleshooting completed.