DTC B115E:54 [PARKING ASSIST UNIT (OPTICAL)]
id0902r0054600
|
Description |
Calibration not performed |
|---|---|
|
Detection condition
|
• The parking assist unit (optical) detects that the side camera calibration has not been performed.
|
|
Fail-safe
|
• Side view guide lines are not displayed when system is starting
|
|
Possible cause
|
• Parking assist unit (optical) malfunction
• Calibration is not performed (VIN mismatch)
|
|
System wiring diagram
|
Not applicable
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY OTHER PARKING ASSIST UNIT (OPTICAL) DTCs
• Clear the DTC for the parking assist unit (optical) using the M-MDS.
• Retrieve the parking assist unit (optical) DTCs using the M-MDS.
• Is DTC U3000:41 or U3000:49 displayed?
|
Yes
|
Replace the parking assist unit (optical), then go to Step 3.
|
|
No
|
Go to the next step.
|
||
|
2
|
PERFORM CALIBRATION
• Perform calibration.
|
-
|
Go to the next step.
|
|
3
|
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
• Clear the DTC for the parking assist unit (optical) using the M-MDS.
• Retrieve the parking assist unit (optical) DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Repeat the inspection from Step 1.
• If the malfunction recurs, replace the parking assist unit (optical).
Go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||