FRONT SASH MOLDING INSTALLATION

id091600807000

Replace parts

1.  After aligning the clip to the front sash molding installation hole, hook the front sash molding tab to the front door.

ac5wzw00011140

2.  Press in the front sash molding in the direction of the arrow shown in the figure and attach the clip to the front door.

Caution

•  Do not press the front sash molding in any place other than the rubber areas.

3.  Press in the front sash molding in the direction of the arrow shown in the figure from vehicle front and install the tab to the front door.

4.  Press in the front sash molding in the direction of the arrow shown in the figure and attach the clip to the front door.

Note

•  After installing the front sash molding, verify that the tabs are connected properly to the body.

5.  Install the following parts:

(1)  Front door garnish (See FRONT DOOR GARNISH REMOVAL/INSTALLATION.)

(2)  Front beltline molding (See FRONT BELTLINE MOLDING REMOVAL/INSTALLATION.)

(3)  Sail garnish (See SAIL GARNISH REMOVAL/INSTALLATION.)