REAR SEAT BACK TRIM REMOVAL/INSTALLATION

id091300989400

Removal

6:4 Split Type

1.  Remove the trunk board. (See TRUNK BOARD REMOVAL/INSTALLATION.)

2.  Remove the rear seat back. (See REAR SEAT BACK REMOVAL/INSTALLATION.)

3.  Remove the headrest.

4.  Remove the rear seat back frame. (See REAR SEAT BACK FRAME REMOVAL/INSTALLATION.)

5.  Remove C-rings in the order of (1), (2), (3), and (4) shown in the figure, and remove the rear seat back trim from the rear seat back pad.

ac5wzw00008369

Caution

•  If a C-ring is damaged while removing or installing the rear seat back trim and rear seat back pad, it may not be possible to install the rear seat back trim and rear seat back pad normally. When removing or installing the rear seat back trim and rear seat back pad, be careful not to damage the C-rings.

•  If a C-ring is damaged, replace it with a new one.

4:2:4 Split Type

1.  Remove the trunk board. (See TRUNK BOARD REMOVAL/INSTALLATION.)

2.  Remove the rear seat. (See REAR SEAT REMOVAL/INSTALLATION.)

3.  Remove the rear seat back. (See REAR SEAT BACK REMOVAL/INSTALLATION.)

4.  Remove the headrest.

5.  Remove the rear seat back frame. (See REAR SEAT BACK FRAME REMOVAL/INSTALLATION.)

6.  Remove C-rings in the order of (1), (2), (3), (4), (5), and (6) shown in the figure, and remove the rear seat back trim from the rear seat back pad.

ac5wzw00008370

Caution

•  If a C-ring is damaged while removing or installing the rear seat back trim and rear seat back pad, it may not be possible to install the rear seat back trim and rear seat back pad normally. When removing or installing the rear seat back trim and rear seat back pad, be careful not to damage the C-rings.

•  If a C-ring is damaged, replace it with a new one.

7.  Peel back the rear seat back trim and remove it from the rear seat back pad while removing the surface fasteners. (Center)

Installation

6:4 Split Type

1.  Align the rear seat back trim with the installation hole of the rear seat back pad, and install the C-rings in the order of (1), (2), (3), and (4) shown in the figure.

ac5wzw00008371

Caution

•  If a C-ring is damaged while removing or installing the rear seat back trim and rear seat back pad, it may not be possible to install the rear seat back trim and rear seat back pad normally. When removing or installing the rear seat back trim and rear seat back pad, be careful not to damage the C-rings.

•  If a C-ring is damaged, replace it with a new one.

Note

•  Wrinkling can be easily prevented by installing the C-rings with a certain amount of tightening.

ac5wzw00007057

2.  Press the rear seat back pad inward while pulling the rear seat back trim outward.

ac5wzw00007058

3.  Align the rear seat back trim with the shape of the rear seat back pad while pressing the rear seat back pad outward.

ac5wzw00007059

4.  Install the rear seat back frame. (See REAR SEAT BACK FRAME REMOVAL/INSTALLATION.)

5.  Install the headrest.

6.  Install the rear seat back. (See REAR SEAT BACK REMOVAL/INSTALLATION.)

7.  Install the trunk board. (See TRUNK BOARD REMOVAL/INSTALLATION.)

4:2:4 Split Type

1.  Install the rear seat back trim to the rear seat back pad while installing the surface fasteners. (Center)

ac5wzw00008372

2.  Align the rear seat back trim with the installation hole of the rear seat back pad, and install the C-rings in the order of (1), (2), (3), (4), (5), and (6) shown in the figure. (LH/RH)

Caution

•  If a C-ring is damaged while removing or installing the rear seat back trim and rear seat back pad, it may not be possible to install the rear seat back trim and rear seat back pad normally. When removing or installing the rear seat back trim and rear seat back pad, be careful not to damage the C-rings.

•  If a C-ring is damaged, replace it with a new one.

Note

•  Wrinkling can be easily prevented by installing the C-rings with a certain amount of tightening.

ac5wzw00007057

3.  Press the rear seat back pad inward while pulling the rear seat back trim outward.

ac5wzw00007058

4.  Align the rear seat back trim with the shape of the rear seat back pad while pressing the rear seat back pad outward.

ac5wzw00007061

5.  Install the rear seat back frame. (See REAR SEAT BACK FRAME REMOVAL/INSTALLATION.)

6.  Install the headrest.

7.  Install the rear seat back. (See REAR SEAT BACK REMOVAL/INSTALLATION.)

8.  Install the rear seat. (See REAR SEAT REMOVAL/INSTALLATION.)

9.  Install the trunk board. (See TRUNK BOARD REMOVAL/INSTALLATION.)