FLOOR INSULATOR REMOVAL/INSTALLATION
id091700889000
Driver-side
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)
2. Remove the following parts:
- (1) Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
- (2) Driver-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
- (3) Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)
- (4) Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)
- (5) Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)
- (6) Selector lever knob (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)
- (7) Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [C66M-R, C66MX-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [D66M-R, D66MX-R].)
- (8) Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)
- (9) Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)
- (10) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
- (11) Front console (See FRONT CONSOLE REMOVAL/INSTALLATION.)
- (12) Accelerator pedal (See ACCELERATOR PEDAL REMOVAL/INSTALLATION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].)
3. Pull the floor insulator in the direction of the arrow and remove it.
4. Install in the reverse order of removal.
Passenger-side
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)
2. Remove the following parts:
- (1) Passenger-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
- (2) Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
- (3) Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)
- (4) Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)
- (5) Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)
- (6) Selector lever knob (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)
- (7) Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [C66M-R, C66MX-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [D66M-R, D66MX-R].)
- (8) Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)
- (9) Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)
- (10) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
- (11) Front console (See FRONT CONSOLE REMOVAL/INSTALLATION.)
3. Remove the fastener.
4. Pull the floor insulator in the direction of the arrow and remove it.
5. Install in the reverse order of removal.
