THEFT-DETERRENT SIREN REMOVAL/INSTALLATION [WITH INTRUDER SENSOR]

id0914008095b7

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Rear scuff plate inner (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(2)  Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)

(3)  Sub trunk box (See SUB TRUNK BOX REMOVAL/INSTALLATION.)

(4)  Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

(5)  Trunk side upper trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

3.  Remove in the order indicated in the table.

acxaaw00001093

1	Connector
2	Clip
3	Nut
4	Theft-deterrent siren

4.  Install in the reverse order of removal.