METER HOOD REMOVAL/INSTALLATION

id091700800900

1.  Remove the following parts:

(1)  Front scuff plate inner (driver’s side) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(2)  Front side trim (driver’s side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(3)  Console panel (See CONSOLE PANEL REMOVAL/INSTALLATION.)

(4)  Console (See CONSOLE REMOVAL/INSTALLATION.)

(5)  Bonnet release lever (See BONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)

(6)  Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)

2.  Pull the upper column cover upward and detach the upper column cover from the lower column cover.

L.H.D.

acxuuw00000659

R.H.D.

acxaaw00000076

3.  Pull the meter hood and remove clips A and tabs B.

4.  Remove the meter hood.

5.  Install in the reverse order of removal.