DTC U0415:68 [FORWARD SENSING CAMERA (FSC)]
id0902p9030100
Description |
Error signal from DSC/RSC HU/CM |
---|---|
Detection condition
|
• Forward sensing camera (FSC) receives the error signal from the DSC/RSC HU/CM for 1 s or more.
|
Fail-safe
|
• Inhibits the lane departure warning system (LDWS).
• Inhibits the high beam control (HBC) system.
• Inhibits the forward obstruction warning (FOW) system.
|
Possible cause
|
• DSC/RSC HU/CM DTC is stored.
• DSC/RSC HU/CM malfunction
• Forward sensing camera (FSC) malfunction
|
System wiring diagram
|
—
|
Diagnostic procedure
Step |
Inspection |
Action |
|
---|---|---|---|
1
|
VERIFY DSC/RSC HU/CM DTCs
• Retrieve the DSC/RSC HU/CM DTCs using the M-MDS.
(See ON-BOARD DIAGNOSIS [DSC/RSC].)
• Are any DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See ON-BOARD DIAGNOSIS [DSC/RSC].)
|
No
|
Go to the next step.
|
||
2
|
PERFORM DTC INSPECTION AND VERIFY DSC/RSC HU/CM MALFUNCTION
• Clear the DTC for the forward sensing camera (FSC) using the M-MDS.
• Turn the ignition switch to the ON position and wait for 2.5 s or more.
• Retrieve the forward sensing camera (FSC) DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Replace the DSC/RSC HU/CM, then go to the next step.
|
No
|
Go to Step 4.
|
||
3
|
VERIFY DTC TROUBLESHOOTING COMPLETED
• Clear the DTC for the forward sensing camera (FSC) using the M-MDS.
• Turn the ignition switch to the ON position and wait for 2.5 s or more.
• Retrieve the forward sensing camera (FSC) DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Repeat the inspection from Step 1.
• If the malfunction recurs, replace the forward sensing camera (FSC).
Go to the next step.
|
No
|
Go to the next step.
|
||
4
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
No
|
DTC troubleshooting completed.
|