HEADLIGHT CLEANER MOTOR INSPECTION

id091900703100

1.  Disconnect the negative lead-acid battery terminal. (See NEGATIVE LEAD-ACID BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the front bumper.(See FRONT BUMPER REMOVAL/INSTALLATION [(E)].)

3.  Disconnect the connector. (See HEADLIGHT CLEANER MOTOR REMOVAL/INSTALLATION.)

Warning

•  Water sprayed on the battery and ground could cause electrocution. When performing the headlight cleaner motor inspection, prepare a container to collect washer fluid and be careful not to spray washer fluid.

4.  Apply battery positive voltage to headlight cleaner motor terminal A, and connect terminal B to ground.

ac30zw00003642

5.  Verify that washer fluid sprays from the headlight cleaner motor.

a30zzw00000238

•  If washer fluid does not spray from the headlight cleaner motor, replace the headlight cleaner motor. (See HEADLIGHT CLEANER MOTOR REMOVAL/INSTALLATION.)