NO.2 MIL ILLUMINATES [L8, LF]


2	MIL ILLUMITATES
DESCRIPTION	The MIL is illuminated incorrectly.
POSSIBLE CAUSE	• The PCM illuminates for emission-related concern (DTC is stored in PCM). • Instrument cluster malfunction Note • If the MIL blinks at steady rate, misfire condition could possibly exist.


STEP	INSPECTION	RESULTS	ACTION
1	Connect the M-MDS to the DLC-2. Retrieve any DTC. Are there DTC displayed?	Yes	DTC is displayed: • Go to the appropriate DTC inspection. (See DTC TABLE [L8, LF].)
1		No	No DTC is displayed: • Inspect instrument cluster operation. (See INSTRUMENT CLUSTER INSPECTION.)
2	Verify test results. • If normal, return to diagnostic index to service any additional symptoms. (See ENGINE SYMPTOM TROUBLESHOOTING [L8, LF].) • If malfunction remains, inspect related Service information perform repair or diagnosis. - If vehicle repaired, troubleshooting completed. - If vehicle not repaired or additional diagnostic information not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [L8, LF].)