DOOR REMOVAL/INSTALLATION

id091100508400

1. Disconnect the negative battery cable.(SeeBATTERY REMOVAL/INSTALLATION [L8, LF].)

2. To remove the door stay (checker), remove the following parts:

(1) Door trim (See DOOR TRIM REMOVAL/INSTALLATION.)
(2) Door speaker (See DOOR SPEAKER REMOVAL/INSTALLATION.)

3. To remove the door hinges, remove the following parts:

(1) Front bumper (See FRONT BUMPER REMOVAL/INSTALLATION.)
(2) Front combination lights (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)
(3) Side step molding (See SIDE STEP MOLDING REMOVAL.) (See SIDE STEP MOLDING INSTALLATION.)
(4) Mad guard
(5) Front fender panel (See FRONT FENDER PANEL REMOVAL/INSTALLATION.)

4. Remove in the order indicated in the table.

5. Install in the reverse order of removal.

6. Adjust the door. (See DOOR ADJUSTMENT.)

1
Connector
2
Bolt A
3
Bolt B
4
Door
5
Nut
6
Door stay (checker)
7
Bolt C
8
Door hinge

Connector Removal Note

1. Pull down the lever in the direction indicated by the arrow and disconnect the connector.